CISCO 7960 / 7940
NOTE: Callture is no longer supporting TFTP Provisioned phones. However, if for some reason this is being done- please follow these instructions.
Before anything, Kamran must put the files in place for this phone on our server- let him know first before anything further can be done. You can find instructions for making this file here (https://docs.google.com/a/callture.com/document/d/1DI_fk5oOsJ8hGItxSfdkQBFxP8UzQuLJ02IQmflF-Bw/edit)
TFTP server Address is: 22.214.171.124
After entering the TFTP the phone should get the configuration from the server.
To enter the TFTP Server, follow these instructions:
- Factory reset the phone
Unplug the power cable from the phone, and then plug in the cable again.
The phone begins its power up cycle.
Immediately press and hold # and while the Headset, Mute, and Speaker buttons begin to flash in sequence, release #.
Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.
If you enter this key sequence correctly, the phone displays this prompt:
Keep network cfg? 1 = yes 2 = no press 2
- Menu --> Unlock Config (option 9)
Default password is cisco
- Go to Menu --> Network Configuration (option 3) -->
Go to 32. Alternate TFTP Option 33) : yes --> save if phone show no “yes” option then go back to step 2 phone might reboot at this point after phone is reboot you may have to repeat step 2 to unlock configuration setup goto 7. TFTP Server and enter 126.96.36.199 as TFTP server .