Auto Provisioning-Yealink SIP T23GP

 

Yealink SIP T23GP

 

How to obtain IP

Menu-Status

 

How to Factory reset  via the  GUI

Settings- Upgrade - click the Reset to Factory soft key.

 

How to Auto-provision

Before configuring the phone to be auto provisioned, the following must have been completed.

a) If you are connecting to a voip phone through a web interface, please make sure that the computer is on the same network as the phone.

 b) Try to do auto provisioning by following the procedure below and rebooting the phone. If that does not work, you can set up the phone manually by following the article on manually configuring the phones.

Log into the phone's web UI (using the phone's IP address).

 

  1. Go to Upgrade.
  2. Choose Advanced.
  3. Server type HTTP.
  4. URL- http://phone.fibrehub.com
  5. Check new config Power On
  6. Confirm
  7. Reboot                                                                                                                

 

How to transfer calls

      

       Blind Transfer 

       1. Press Tran soft key during a call.
       2. Enter the number you want to transfer the call to.
       3. Press the Tran soft key to complete the transfer.
       Then the call is connected to the number to which you are transferring.

       Semi Attended Transfer

       1. Press  the Tran soft key during a call.
       2. Enter the number you want to transfer the call to.
       3. Press OK or #  to dial out.
       4. Press  the Tran soft key to complete the transfer when receiving the                    ringback.

 

       Attended Transfer

       1. Press the Tran soft key during a call.
       2. Enter the number you want to transfer the call to.
       3. Press OK or #  to dial out.
       4. After the party answers the call, press or the Tran soft key to complete          the transfer. 

 

 

 

Have more questions? Submit a request

Comments

Powered by Zendesk