Auto Provisioning-Polycom VVX 500 2200-44500-025


Polycom VVX 500  2200-44500-025



How to obtain IP

Home - Settings - Status - Network - TCP/IP Parameters




How to Factory reset  via the  Phone 


1)Press and hold the following keys simultaneously during the Updater/BootROM countdown process until the password prompt displays.

VVX 300 , 310, 400, 410 , VVX 500,VVX600 and SpectraLink 8400 Series:

1, 3, and 5 dial pad keys

Since UCS 3.3.0 and the introduction of the Updater the starting of the Application has to be canceled:


2)Press the Cancel Softkey

3) Now press the matching multiple key combination  - 1, 3, and 5 dial pad keys

Above now requires the Admin password 456.


How to Auto-provision

Before configuring the phone to be auto provisioned, the following must have been completed.

a) If you are connecting to a voip phone through a web interface, please make sure that the computer is on the same network as the phone.

 b) Try to do auto provisioning by following the procedure below and rebooting the phone. If that does not work, you can set up the phone manually by following the article on manually configuring the phones.

Log into the phone's web UI (using the phone's IP address).

  1. Go to Settings.
  2. Choose Provisioning server.
  3. Server type HTTP.
  4. Server Address

 For  DHCP Menu

  1. Boot Server  Static.
  2. Click "Save ".
  3. Click "Reboot".



How to transfer calls


1 Press and hold Transfer.

2 Choose Blind or Consultative.

3 Dial a number or choose a contact. If you chose Blind, the call is transferred immediately.

4 If you chose Consultative, tap Transfer.



Have more questions? Submit a request


Powered by Zendesk